Since fires can present serious threats to both life and property, fire alarm systems for houses are essential for safety in Pakistan.
The National Fire Protection Association (NFPA) reports that hundreds of these accidents occur in Pakistan each year, leaving many people dead and causing significant property damage.
Poor safety measures sometimes exacerbate the severity of these catastrophes.
This emphasizes how crucial it is to install and maintain efficient fire protection measures in Pakistani structures.
Every house is required to have the best quality fire alarm system. It identifies and detects the slightest flame. It issues an alert to notify the residents of fire hazards.
It comes in varieties, each intended for a particular use case and setting. These are a few typical kinds:
Smaller structures are typical applications for conventional alarms. They create zones within the building, and the alarm panel designates the particular zone that is activated when a detector within that zone is triggered.
These are simpler to install in buildings with expensive or challenging cabling as they communicate wirelessly.
Addressable Alarms are appropriate for larger buildings and can precisely locate a fire or other malfunction.
Every device (heat detector, smoke detector, etc.) has a distinct address, making identification possible.
These are more sophisticated than addressable systems and offer additional details on the status of every item. They can also be set up to react in a certain way.
These are capable of determining whether or not there is a danger by analyzing data from several detectors. They can lower false alarms and are more advanced.
These are less expensive and easier to install than standard systems since they only require two wires to connect devices.
These consist of broken glass units or manual call points that must be manually triggered to sound the alarm.
ASPECT | CONVENTIONAL | ADDRESSABLE |
Device Identification | Zones indicate the general area of alarm. | A separate address is given to each addressable system. |
Location Identification | Cannot pinpoint the exact device location. | Can pinpoint exact device location. |
COMPONENT | DESCRIPTION |
Control Panel | A central hub that monitors inputs and triggers alarms. |
Smoke/Heat Detectors | Detect smoke or heat and trigger the alarm. |
Manual Call Points | Manual switches to raise the alarm in case of emergency. |
Alarm Sounders | Produce audible alarm signals to alert occupants. |
Strobe Lights | Visual alarms for occupants with hearing impairments. |
Sprinkler Flow Switches | It identifies the flow of water in sprinklers and issues an alert to alarms. |
Monitoring Service | Service that monitors alarms and alerts authorities if needed. |
The cost of a fire alarm system for a house varies depending on its kinds, the manufacturer, the installation’s difficulty, house type, and size.
Green Tech Solution has been in the industry for the last 10 years. We never compromise on quality. Our experts install and maintain systems in the following areas:
Early detection by fire alarms minimizes property damage by enabling a fast evacuation.
The main advantage of these alarms is that they save lives by warning residents of an impending fire so they may leave the building safely.
By promptly notifying authorities, these alarms lessen the amount of damage caused and assist in safeguarding property.
A lot of these alarms come with 24/7 monitoring built in, so in the event of casuality, emergency personnel will be notified right away.
Setting up a alarm system guarantees adherence to building codes and municipal fire safety laws.
It identifies potential hazards before they arise. It receives the signal from the sensor and issues it to the panel. The signals can be in the form of smoke, flames.
A fire alarm system needs to be maintained to guarantee correct operation and dependabilityfire.
The following are some essential maintenance tasks:
Test it frequently per local laws and manufacturer’s instructions.
This entails testing the control panel, alarms, smoke detectors, and heat detectors.
Change the batteries in smoke detectors and other parts as advised by the manufacturer; this should be done around once a year.
Make sure smoke detectors and other sensors are kept free of dust and debris regularly since this might reduce their sensitivity.
Make sure every bedroom and sleeping area in your house has a smoke detector for maximum protection.
Install smoke detectors in every corridor as well; if a hallway is longer than 40 feet, install smoke detectors at both ends.
GreenTech, a leading fire fighting brand in Pakistan offers the best fire alarm services for your house. Now you might be asking yourself that are many other brands then why should you work with GreenTech?
No need to go further. You can trust GreenTech for several reasons like
A fire alarm in a home detects smoke and heat and prevents outbreaks. It can minimize the damage and helps you to be safe and secure in your house
Two basic types of fire alarms are commonly used in homes.
In sum, fire alarm systems for houses in Pakistan are very crucial and super important. You must have it in your house to ensure the safety of your loved ones and belongings.
